Verilink AS56/56Plus (896-502588-001) Product Manual - Manual (Page 88)

Auxiliary Ports
6-10 AS56 and AS56 Plus User Manual
Configuration Menus
This section describes the systemconfiguration menus for T1/FT1 mode
and 56/64 kbps DDS mode.
T1/FT1 mode From the terminal’s T1 Main Menu, the user has selected System
Configuration and is presented with the following menu.
From this menu, the user can view and/or change all Access Sy stem56
configuration parameters. Please refer to Chapter 3, Configuring and
Installing the Access Syst em56, before changing any parameter(s).
By selecting View DS0 Allocations, the user can view all DS0
assignments on a single screen. This is the same function as Checking the
“T-Channels”, on page 3-18.
Note that “Idle” refers to channels that have been configured as “Not
Used” in the Access Syst em56.
Add 1 screen
Verilink Corporation April 26, 1996
AS56 Plus T-1 CSU/DSU 14:37:02
Unit ID: 01234567
SYSTEM CONFIGURATION
Network (NI) Serial Port Configuratio
Configuration Port #1
Framing...: D4 Speed....: 56K (1 DS0)
Line Code.: AMI First DS0: 08
LBO.......: 0 db DS0 Order: Alternate DS0s
Density...: Clear Interface: V.35
NTWK Loops: Yes DCD......: Off
Yellow Alm: Yes Data.....: Inv
ESF Format: 54016 Clock....: Norm
CRT Alarm.: Off Timing...: Internal
Rem Loop.: Enabled
System Clock
Source....: Int
View DS0 Allocations = [V]
Cursor Forward = [SPACE] Next/Previous Entry = [ENTER]/[B]
Cursor Back = [BACKSPACE] Return to Previous Menu = [X]