Verilink AS56/56Plus (896-502588-001) Product Manual - Manual (Page 115)

AS56 and AS56 Plus User Manual A-1
Appendix
A
Standard Cabling for User Ports
Network Interfaces
The T-1 and 56/64 kbps DDS Network Interfaces both use an 8-pin
modular jack in an RJ-48 configuration. The figures to the right show the
pin numbering and the pin assignments of the two jacks. The following
cables are recommended:
CBE-010-56001 Dual purpose 8-position, 8-pin male/male modular ca-
ble (RJ-48 configuration). Used for connecting either the T-1 port to the
supplier's T-1 network interface or the 56/64 kbps DDS port to the suppli-
er's 56/64 kbps DDS network interface. Fifteen feet long. One cable sup-
plied with unit. Additional cable optional at extra cost.
458-501766- 0 0 8 Eight-position, 8-pin male/male modular cable (RJ-48
configuration with crossover wiring). Normally used for connecting the T-
1 ports for two Access Syste m56 units directly. Eight feet long. Optional
at extra cost.
CBE-011-56641 Eight-position, 8-pin male/male modular cable (RJ-48
configuration with crossover wiring). Normally used for connecting the
56/64 kbps DDS ports for two Access Sys tem56 units directly. Fifteen
feet long. Optional at extra cost.