Verilink AS56/56Plus (896-502588-001) Product Manual - Manual (Page 75)

Utilities
AS56 and AS56 Plus User Manual 5-9
Utilities
From the Utilities Main Menu, SELECT then use UP/DOWN arrows to:
■
View Unit Type
The unit type can only be viewed through the front panel but it can be
changed through the terminal.
■
Set Date and Time
After selecting Set Date/Time from the Utilities Menu, use the UP/
DOWN arrows to scroll through the parameter selections (hour,
minutes, seconds, day, month, year) and SELECT to choose the
parameter you wish to increment the time and date. END takes you
back to the Utilities Menu.
■
Edit Unit ID#.
After selecting Edit Unit ID from the Utilities Menu, use the UP/
DOWN arrows to move the cursor to the next digit of the ID number.
SELECT increments each digit from 0-9. END takes you back to the
Utilities Menu.
■
Clear BRAM. This function clears all user-entered configuration
parameters and returns the Access Syste m56 unit to the factory
default condition. USE WITH CAUTION.
■
Determine installed software level. END takes you back to the
Utilities Menu.
■
Configure Auxiliary NMS/Printer Port. See Chapter 6, Auxiliary
Ports.
Note: After selecting NMS/Printer Port from the Utilities Menu,
use the
UP/DOWN arrows to choose Mode, Speed, or Edit IP
Address.
• The options for Mode are SNMP NMS, Printer, or Disabled.
• The options for Speed are 1200, 2400, 4800, 9600, and 19200.
See Chapter 6, Auxiliary Ports . END takes you back to the Utilities
Menu.