Verilink AS56/56Plus (896-502588-001) Product Manual - Manual (Page 28)

Configuring and Installing the Access Syste m56
3-4 AS56 and AS56 Plus User Manual
Steps 4 through 11 (below) apply to T1/FT1 network interface
configuration while Steps 12 through 15 apply to 56/64 kbps DDS
network interface configuration.
4. NI Framing. This information must be obtained from the network
supplier. Depress
SELECT to choose between D4 and ESF.
5. NI Line Code. This information must be obtained from the network
supplier. Depress
SELECT to choose between AMI and B8ZS.
6. NI LBO (Line Build Out). Should be set to 0 dB unless the network
supplier specifically requests otherwise. If requested, repeatedly
SELECT to choose 0, 7.5, 15, or 22 dB.
NOTE
Configuration
_NI Interface
SELECT to
display:
NI Configuration
Framing:_XX
SELECT to
display:
NI Configuration
Line Code:_XXX
DOWN to
display:
NI Configuration
LBO..:_X dB
DOWN to
display: