Verilink AS56/56Plus (896-502588-001) Product Manual - Manual (Page 38)

Configuring and Installing the Access Syste m56
3-14 AS56 and AS56 Plus User Manual
The Int/Ext setting may require a special DTE configuration or a
modified cable. Please refer to Appendi xA, Standard Cabling for
User Ports for more information.
25. Serial Port Remote Loop Enable/Disable.
Depress SELECT to choose between Yes (Enabled) and No
(Disabled).
When Enabled, this Serial Port channel will respond to receipt of a
remote digital loop command arriving from the Serial Port channel of
the mated Access Syst em56 unit. Enabled is recommended unless
the user has specific reason to do otherwise.
When Disabled, this Serial Port channel will not respond to receipt
of a remote digital loop command.
Serial Port
Rem Loop:_Yes
DOWN to
display:
Configuration
__Serial Port
END to display:
Main Menu HH:MM
__Configuration
END to display: