Skutch Electronics TimeClockNet 3 - Manual (Page 4)

4
TimeClockNet 3
(Time clock Software for Windows Based Networks)
Introduction
TimeClockNet 3 is a simple to use, networked based time clock software package. It can handle from 1 to
200 employees. The system allows employees to Clock IN or OUT from any computer connected to the
network. This means no more time cards to hassle with. Each employee uses a pre-assigned PIN code to
punch IN and OUT of work. TimeClockNet 3 maintains an accurate log of the total hours that each
employee works throughout each pay period. At the end of each pay period TimeClockNet 3 is used to
print an individual Time Sheet for each employee and a Summary Report of all employees. TimeClockNet
3 can also be used to track the total hours for a particular job or project. At the completeion of the project, a
report can be printed that shows all labor hours and billable labor amount for that particular job. The
TimeClockNet 3 package consist of three separate programs. If you are updating from an earlier 1.xx
version, you can use the Convert utility to transfer employee data.
TCNSatellite
This program is installed on each computer that will be used by employees to punch IN or OUT. This
program can be installed on as many computers as desired. It only needs to be running when an employee
needs to punch IN or OUT. This program is supplied free of charge and does not require registration.
TimeClockNet
Master
TimeClockNet
Satellite
TimeClockNet
Manager
TimeClockNet
Satellite TimeClockNet
Satellite
TimeClockNet
Satellite And
DSL Modem
Router
Printer
Typical TimeClockNet Installation