Skutch Electronics TimeClockNet 3 - Manual (Page 15)

15
Setup
Master Directory
Before TCNSatellite can be used, the Master Directory must be set correctly. The Master Directory is
always located on the ROOT directory of the computer and drive that
the TCNMaster program is installed on.
Termination
Normal: After you PUNCH IN or OUT, TCNSatellite remains
running.
Auto Close on PUNCH: After you PUNCH IN or OUT,
TCNSatellite will automatically close.
Auto Minimize on PUNCH: After you PUNCH IN or OUT,
TCNSatellite will remain running, but will automatically minimize.
Information Displayed
Total Hrs worked Today
TCNSatellite will display the total hours that you have worked today
after a PUNCH IN or OUT.
Total Hrs worked this PAY PERIOD
TCNSatellite will display the total hours that you have worked so far
for the current pay period, after a PUNCH IN or OUT.
Punch Time
The blue punch time is the actual time that will be stored on the time
sheet. All PUNCH times are automatically rounded to the nearest
tenth of an hour. This supplies a six minute window for each PUNCH
period, which is three minutes plus, and three minutes minus, for
each PUNCH time. For example; if an employee is supposed to punch
TimeClockNet
Punch Times
From 8:00 am untill 9:00 am
0----8:00 am
1----8:06 am
2----8:12 am
3----8:18 am
4----8:24 am
5----8:30 am
6----8:36 am
7----8:42 am
8----8:48 am
9----8:54 am
10--9:00 am
Tenths------Time