Sierra Video MFC-8300 - Manual (Page 51)

MFC-8300 Series User Manual (Ver. 1.0) DashBoard Lite Applet
• 7-3
DashBoard Lite Applet Overview
When first started, the DashBoard Lite applet connects to and displays the specific frame you entered
the IP Address for, and the devices installed in that frame. The interface resembles the DashBoard
interface but does not support the restoring of card settings from a file, nor the porting of card settings
from one card to another.
Interface Overview
This section includes a brief summary of the DashBoard Lite applet interface and its components.
Figure 7.1 DashBoard Lie Applet Interface Example
1. Navigation Pane
The DashBoard Lite applet displays the following details in the Navigation Pane:
 An indicator for the frame. If you entered a new name using the Add Frames dialog, it is
displayed beside the indicator. The indicator beside the frame is the worst-case status of
all cards in the frame.
 The product name for each card installed in the frame and which slot it is in. The name
for each card is the product name as reported by the card.
 Indicators for each card in the frame. The cards and their status are detected
automatically.
2. Status Area
This area is located in the tabbed menu on the lower left of the screen. This area displays the status
parameters as reported by the card including the Product tab. The Product tab displays the
product name, alarm status, details about the most serious alarm reported, and the connection
status. The information in the Status Area is read-only.