Sierra Video MFC-8300 - Manual (Page 11)

MFC-8300 Series User Manual (Ver. 1.0) Introduction
• 1-3
Documentation Terms
The following terms are used throughout this guide:
• “Frame” refers to any openGear frame within your video system.
• All references to the DFR-8300 series frame also includes all versions of the 10-slot and
20-slot frames and any available options unless otherwise noted.
• All references to the DFR-832x series frames also includes all versions of the DFR-8320
and DFR-8321 series frames unless otherwise noted.
• All references to the MFC-8320-N Network Controller Card also includes the MFC-
8320-NS unless otherwise noted.
• References to DIP Switch positions on the card are in the following format: SW#-X where
# represents the silk-screen label on the card for the set of DIP Switches, and X represents
the position. For example, SW1-8 refers to the SW1 Switch position 8.
• “Operator” and “User” refer to the person who uses the MFC-8300 Series Controller
Card.
• “Board”, and “Card” refer to openGear terminal devices within openGear frames,
including all components and switches.
• “System” and “Video system” refer to the mix of interconnected production and terminal
equipment in your environment.
• “DashBoard” refers to the DashBoard Control System™.
• The “Operating Tips” and “Note” boxes are used throughout this manual to provide
additional user information.