Sierra Video MFC-8300 - Manual (Page 45)

MFC-8300 Series User Manual (Ver. 1.0) DashBoard Menus
• 6-9
DataSafe Tab
Table 6.5 summarizes the DataSafe Menu options available in DashBoard for the MFC-8300 Series
Controller Cards.
Note — This tab is not available when using an MFC-8320-S.
This tab displays an array of cards based on the frame the selected card is installed in.
Table 6.5 DataSafe Menu Items
Menu Title Item Parameters Description
### [y]
e
Card Type and
Software Revision
aaa-bbbb :: #.##
Displays information for the card currently
installed in that slot; where aaa-bbbb
represents the card name, and #.##
represents the current software version of
the card.
Correct Mismatch <- Update Slot
Press this button to automatically update
the slot with the new card information
indicated in the Conflict field.
Conflict
When blank, this field indicates that the
card currently in the slot has the same
card type and software version as the
saved DataSafe data
##
Indicates that the software version or the
card type do not match the saved data for
the slot
Disable
Checkbox is selected*
Disables DataSafe for the selected slot.
You may still monitor the slot, but you
cannot update the slot with any new
configuration data received when a new
card is installed in the slot.
Checkbox is cleared
Enables the Conflict field to display any
card mismatch information. To update the
slot, you must press the <- Update Slot
button.
Force
Press this button to load the current
DataSafe data to the cards. This button is
enabled only if a software version
incompatibility exists.
e Displays the current slot name (###) and the slot number [y]. For example, Slot 5 [1]. The slot name is set in
the Cards Slot Name field of the Setup tab.