Sierra Video MFC-8300 - Manual (Page 47)

MFC-8300 Series User Manual (Ver. 1.0) DashBoard Menus
• 6-11
SNMP Tab
Table 8.6 summarizes the SNMP Menu options available in DashBoard for the MFC-8300 Series
Controller Cards with the SNMP feature.
Table 8.5 SNMP Menu Items
Menu Title Item Parameters Description
SNMP
Trap/Notification
Target
Adds a trap/notification target
Add Adds the selected target
Delete Deletes the selected target
Read Community
String Specifies the SNMP password for GET
requests
Write Community
String Specifies the SNMP password for SET
requests
Apply
Applies the current changes and saves
them to the card memory
Cancel Cancels the changes
Notes on the Trap/Notification Target Feature
Keep the following in mind when adding and saving Trap/Notification targets in the SNMP tab:
• When entering a new target in the Trap/Notification Target field, enter the text in the
field, and then press Enter to enable the Add button.
• Click the Add button to add the new target to the Trap/Notification Target drop-down
list.
• A maximum number of 6 strings are displayed in the Trap/Notification Target drop-
down list at one time. If at the maximum number, you must select a string from the drop-
down list and delete it before adding a new entry.
• Press Apply to save the strings in the Trap/Notification Target drop-down list to non-
volatile memory.