Sierra Video MFC-8300 - Manual (Page 28)

3-4
• MFC-8320-S Setup
MFC-8300 Series User Manual (Ver. 1.0)
LEDs on the MFC-8320-S
The front card-edge of the MFC-8320-S, and the frame door, have LED indicators for the cooling
module fan, alarm, and communication activity. Refer to Figure 3.4 for the location of the card-edge
LEDs on the MFC-8320-S.
Figure 3.4 MFC-8320-S Card-edge Controls
Table 3.2 provides information on the LED displays of the MFC-8320-S.
Table 3.2 MFC-8320-S LED Descriptions
LED Color Description
Alarm Red
When lit, this LED indicates a major alarm condition is
occurring in the frame.
OK Green
When lit, this LED indicates the MFC-8320-S is operating
normally.
CAN Yellow
When flashing, this LED indicates the MFC-8320-S is
communicating with the other cards within the frame.
When off, this LED indicates an absence of incoming messages.
Ethernet Yellow
When lit, this LED indicates a valid ethernet connection but the
card is not receiving messages from DashBoard, a control panel,
or an external SNMP agent.
When flashing, this LED indicates the card is communicating
over the ethernet connection to DashBoard, a control panel, or
an external SNMP agent.
When off, this LED indicates an absence of ethernet connection.