Scotsman CME306 - Manual (Page 6)

Location
Air cooled models take room temperature air in
from the left side and discharge warm air out the
back. Do not place them where the heat and noise
will be objectionable.
A 6 inch MINIMUM clearance between the back
and a wall and between the left side and a wall or
another product is required for the basic operation
and service of the air cooled model.
Note: A six inch side clearance with zero top
clearance will NOT provide enough air exchange
space for optimum performance. 12 inches side
clearance is required when there is no top
clearance.
Air cooled models come equipped with a baffle
that can be used when the machine is installed
in a corner.
The purpose of the baffle is to limit air
recirculation. This can occur in a corner when the
hot air from the back of the machine is re-drawn
back into the machine from the nearest side of the
machine.
Install the air baffle as shown on the left rear
corner when a side wall and back wall are between
6 and 18 inches from the unit.
CME306 & CME456
January 2000
Page 6
Air
Baffle
Back View of Ice
Machine
Remove Air Baffle from its
Shipping Position.
Baffle Position Baffle
Ice Machine
Top View
Ice Machine
Top View
Wall Wall
Use baffle for
In-The-Corner Applications
Condenser
Outlet
Attach
Baffle
Here
Airflow is
in the left
side and
out the
back