Scotsman CME306 - Manual (Page 30)

Additional Maintenance: Condenser
To Clean the Air Cooled Condenser
1. Remove the front panel.
2. Push and release the Off button.
3. Remove the top panel.
4. Remove the left side panel.
5. Check the fan blade(s) and condenser for
grease or dust build up.
Because air flow is from the inside of the cabinet
out, the inside of the condenser fins will have the
most build up.
A. Place the inlet hose of a vacuum cleaner in
the condenser shroud.
B. While the vacuum cleaner is on, blow
compressed air from the back of the condenser
thru the fins.
C. If grease is present, use coil cleaner on the
condenser. Be sure to wipe up any excess coil
cleaner.
7. Additional access can be gained by removing
the fan and motor shroud assembly.
A. Remove the 6 sheet metal screws holding the
assembly to the condenser.
B. Unplug the fan motor(s)
from the wire harness.
C. Lower and tilt the
assembly until it clears the
refrigerant lines.
D. Lift it out of the machine.
8. After cleaning, return all
panels except the front to
their original positions.
9. Push and release the
Freeze button.
10. Replace the front
panel.
CME306 & CME456
January 2000
Page 30
Sheet Metal
Screw
Fan Motor
Harness