Removal and replacement: fan blade and/or fan – Scotsman CME306 User Manual
Page 38
Removal and Replacement: Fan Blade and/or Fan Motor
1. Disconnect electrical power.
2. Remove front, top and left side panels.
3. Remove the fan and motor shroud assembly.
A. Remove the 6 sheet metal screws holding the
assembly to the condenser.
B. Unplug the fan motor(s) from the wire harness.
C. Lower and tilt the assembly until it clears the
refrigerant lines.
D. Lift it out of the machine.
4. Replace the blade or motor as needed.
CME306 & CME456
December 1999
Page 38
Electrical Shock Hazard
Disconnect Electrical Power
Before Servicing
Sheet Metal
Screw
Fan Motor
Harness