Rena T-650 - Manual (Page 95)

OPERATION
Tab Fold Position:
When side tabbing; the Fine Adjustment
Knobs (1) and (2) can be used to make small
corrections to the fold position (amount of tab
on top/bottom of media).
Fine Tune Head 1:
ƒ By turning this knob (1)
clockwise; Head 1 moves
towards the operator side,
which will cause less of
the tab to be placed on the
top side of the media.
ƒ By turning this knob (1)
counter-clockwise; Head
1 moves away from the
operator side, which will
cause more of the tab to
be placed on the top side of the media.
Fine Tune Head 2:
ƒ By turning this knob (2) clockwise; Head 2
moves towards the
operator side, which will
cause more of the tab to
be placed on the top side
of the media.
ƒ By turning this knob (2)
counter-clockwise; Head
2 moves away from the
operator side, which will
cause less of the tab to be
placed on the top side of
the media.
NOTE: The maximum amount of tab that can be wrapped onto the bottom side of the
media is ¾”. If you exceed this maximum, the tab will be damaged/torn or wrinkled.
T-650 Operations REV. 8/25/2010 95