Rena T-650 - Manual (Page 70)

OPERATION
24. The Enter Offset for Tab 1 screen will appear.
In this example, the USPS requires that
the first tab be positioned less than 1/2”
from the bottom of the mail piece, so
the position of Tab 1 should not be
greater than 1/2” from the leading
edge.
Enter the desired value, in this case
0.4900”, using the number keys on the
control panel and press the Save key.
25. Press the BACK key.
26. The Select Tab Offset screen will
reappear.
S
elect Tab 2.
27. r Offset for Tab 2 screen will
hould
e within 1” of the trailing edge.
tting would be about 5.600”. ((8” piece length – 1.5” tab – 0.9” (within 1”) = 5.600”))
osition for tab 2 using the number keys, in our case 5.600” and then press the
28. ress the BACK key five times, to return to the Select Setup Option screen.
29. Select V-Tab from this screen.
The Ente
appear.
The USPS requires that the second tab
be positioned less than 1” from the top
edge of the mail piece. In our case; due
to the orientation of the media through
the tabber, the position of Tab 2 s
b
In this example the piece is 8.0” long and we are using 1.5” tabs, as required, so the
se
Enter the p
Save key.
P
T-650 Operations REV. 8/25/2010 70