Quintum Technologies Tenor DX - Manual (Page 115)

10-20 P/N 480-0049-00-10
Chapter 10: Using IVR
ANI Authentication Application Type 2 - Call Flow
ANI Authentication Application Type 2 enables calling subscribers to receive three authentication types based
on the calling number: (1) Authentication with ANI, (2) No ANI case (if no ANI in coming packet, Tenor DX
asks PIN number by prompt) and (3) Incoming packet has the ANI, but authentication with the ANI fails and
Tenor DX prompts for the PIN number.
ANI Authentication Application Type 2 - Call Flow is a diagram of the call flow for ANI Authentication
Application Type 2, which details the messages transmitted between the following components:
Calling Party. The originating caller using a pre-paid calling card.
ANI AUTH Enabled Tenor. The Tenor DX which enables the ANI authentication functions.
RADIUS Server. Remote Authentication Dial-In User Service for authenticating with ANI the calling num-
ber.
Called Party. The destination called party.