Quintum Technologies Tenor DX - Manual (Page 113)

10-18 P/N 480-0049-00-10
Chapter 10: Using IVR
ANI Authentication Application Type 1 - Call Flow
ANI Authentication Application Type 1 enables calling subscribers to receive authentication based on the call-
ing number. If you configure the ivrtype to 4 (ANI Type 1), when an incoming call comes in, the call will be
authenticated with ANI by a RADIUS server.
ANI Authentication Application Type 1 - Call Flow is a diagram of the call flow for ANI Authentication
Application Type 1, which details the messages transmitted between the following components:
Calling Party. The originating caller using a pre-paid calling card.
ANI AUTH Enabled Tenor. The Tenor DX which enables the ANI authentication functions.
RADIUS Server. Remote Authentication Dial-In User Service for authenticating with ANI the calling num-
ber.
Called Party. The destination called party.