QuickLabel 50 Kiaro! - Manual (Page 60)

Designing and Printing Labels
44 Kiaro! 50 User Guide
Printing Labels
1 Ensure the label media has been loaded.
2 If you are printing from a third-party design application, ensure the printer driver
preferences are configured.
3 Open the label file using the appropriate software. Then choose to print the label,
and enter the number of copies you would like to print.
Note: If your software has a collate option, disable it before printing.
4 Print the labels. The Status Monitor will automatically open and display
information about printer and job status.
The job progress will be displayed in the Status Monitor.
If necessary, you can cancel the print job by choosing Cancel Job/Reset Error on
the Status Monitor.
5 Receive the printed labels.
Note: Do not pull the printed labels in any direction as they exit the printer. Pulling the
labels may result in a media jam.
• If Cutter Enabled is checked in the printer driver Layout tab, the printed
labels will automatically be cut at the end of the job.
• If Cutter Enabled is not checked in the printer driver Layout tab, the printed
labels will not be cut at the end of the job. Instead, you can use the manual cut
feature by pressing and holding the Pause key for at least two seconds.
Related Topics:
- Setting up Layout Options on page 42
- Operating the Manual Cut on page 55