General safety – QuickLabel 50 Kiaro! User Manual
Page 125
Safety Warnings and Precautions
Kiaro! 50 User Guide
109
source can supply sufficient power for the printer. This could cause a fire or serious
electrical shock, or damage the printer.
Supply voltage: AC100-240V, 50/60Hz
Power consumption: 85W (max), sleep mode 5.5W
General Safety
Warning
•
If you find a large ink leak, switch the printer off immediately, disconnect the
power plug from the power source, and call for service. If you continue to use the
printer, this could cause a fire or serious electrical shock.
•
Never clean the printer with water or any flammable liquid (alcohol, benzene,
thinner, etc.) either applied directly or with a cloth. If you accidentally spill liquid
on the printer, switch the printer off immediately, disconnect the power plug from
the power source, and call for service. If you continue to use the printer, this could
cause a fire or serious electrical shock.
•
If the printer emits smoke, unusual odors, or makes noises, leaving it could cause
a fire or serious electrical shock or damage to the printer. Switch the printer off
immediately, disconnect the power plug from the power source, make sure that
the printer has stopped smoking, and call for service. Do not attempt to repair the
printer by yourself. This could cause a fire or serious electrical shock.
•
Use only a slightly damp cloth, thoroughly wrung out, to clean the printer
surfaces. Never use alcohol, thinner or any other flammable liquids. If such
materials come into contact with electrical components inside the printer, this
could cause a fire or serious electrical shock.
Caution
•
There are high voltage points inside the printer. To avoid a fire or electrical shock,
never attempt to disassemble or repair the printer.
•
Never insert or drop any metal objects into the printer when it is open. This could
cause a fire or serious electrical shock, or damage the printer. If something falls into
the printer accidentally, switch the printer off immediately, disconnect the power
plug from the power source, and call for service. If you continue to use the printer,
this could cause a fire or serious electrical shock.
•
If the printer is dropped and damaged, switch the printer off immediately,
disconnect the power plug from the power source, and call for service. If you
continue to use the printer, this could cause a fire or serious electrical shock.
•
To avoid a fire or electrical shock, never use flammable sprays around the printer.
•
Never remove the cover from the printer. This could cause a serious electrical
shock.
•
Keep children from touching the power cord, internal parts of the printer when it
is open, and moving parts inside the printer. This could cause personal injury or
damage the printer.