Niveo Professional NNAS-R4 User Manual
Page 40
NAS System
40
User Manual
NOTE: After NASVG is initialized, the Storage Information screen will
show a pie chart with amount of Free Size and Used Size. Volumes
can be created from the NASVG.
NOTE: The default “home” volume cannot be deleted.
11. After the RAID disk is joined to NASVG, the RAID status in Disk Information will
show “IN_USED”.
NOTE: Once a RAID disk has been joined to the NASVG Storage Pool,
the RAID disk can no longer be deleted. Once joined, the RAID disk
status will be shown as “IN_USED” which means the NAS system is
already using the RAID disk.
The way to delete existing RAID disks which are already joined to
Storage Pool is to reset NAS to factory default in “System”
“Boot/Shutdown” “Reboot to Default”. WARNING! Using this option
will delete all existing RAID configuration and data, and the NAS will
be reset to factory default settings.