Niveo Professional NNAS-R4 - Manual (Page 138)

NAS System
138 User Manual
Import Config – Use this button to import and restore a previously saved
(exported) NAS system configuration.
NOTE: Import Config function requires that the NAS be reset to
factory default setting before a saved configuration file can be
restored.
NOTE: If you have made a Data Backup to Local Disk (or external
eSATA disk), shutdown the NAS and remove the Local Disk (or eSATA
disk) with Data Backup, then power on the NAS and do “Reboot to
Default”. If the Local Disk with Data Backup is in the NAS when
“Reboot to Default” is executed, the data on the Local Disk will also
be cleared.
To import configuration:
1. Use “Reboot to Default” to reset the NAS to factory default settings.
2. After reset to default, login to NAS GUI. You may need to verify the
assigned IP of the NAS.
3. When the warning message below appears, select “No”.