Niveo Professional NNAS-R4 - Manual (Page 137)

NAS System
User Manual 137
Reboot to Default:
Reboot to Default – Use this button to reboot the NAS and restore to
default configuration.
WARNING! Use the “Reboot to Default” function with care. Resetting
the NAS to default configuration will delete the current NAS settings
and erase all existing data.
NOTE: If you have made a Data Backup to Local Disk (or external
eSATA disk), shutdown the NAS and remove the Local Disk (or eSATA
disk) with Data Backup, then power on the NAS and do “Reboot to
Default”. If the Local Disk with Data Backup is in the NAS when
“Reboot to Default” is executed, the data on the Local Disk will also
be cleared.
Configuration:
Export Config – Use this button to export the NAS system configuration and
save as image file, which can be used later for restoration. After
clicking “Export Config”, click “Save” to save the configuration image
file.
NOTE: Your web browser might be configured to block pop-ups. You
need to allow pop-ups (temporarily) to be able to download and save
the configuration file.