Niveo Professional NMC220PR - Manual

NMC220 series
PoE Media Converter Series
PSE / PD
1000BaseT(X) to 1000BaseX
(IEEE 802.3af/at)
Quick Installation Guide
FCC Warning
This device has been tested and found to comply with
limits for a Class B digital device, pursuant to Part 2 and 15
of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates and radiates radio frequency
energy and, if not installed and used in accordance with the
user’s manual, it may cause interference in which case
users will be required to correct interference at their own
expenses.
CE Warning
This is a Class B product. In a domestic environment,
this product may cause radio interference in which case
the user may be required to take adequate measures.
Introduction
This PoE Gigabit Ethernet Media Converter Series is
designed to bridge a 1000BaseTX signal to a 1000BaseFX
signal. It’s used to extend the distance connection between
two Gigabit Ethernet twisted-pair devices via the fiber cable
transparently with no performance degradation.
This PoE Gigabit Ethernet Media Converter Series is
based on the switching hub design. It can support
Auto-Negotiation and Flow Control function on the
twisted-pair port. Besides.
There are two kinds of PoE Media Converter - PSE and
PD.
A. PSE - Power sourcing equipment is a device
providing power to a PD device.
(IEEE 802.3at ; IEEE 802.3af compatible)
B. PD - Powered device is a device powered by a PSE.
(IEEE 802.3af ; it also can receive power from
IEEE 802.3at)
Package Contents
Before you start to install this Media Converter, please
verify your package that contains the following items:
PSE :
 One PoE Media converter
 One Quick Installation Guide
 One Power Adaptor 48V / 0.83A
 One AC power cord
PD:
 One PoE Media converter
 One User’s Manual