Manual layout – Measurement Computing Daq PC-Card User Manual
Page 5

DaqBook/DaqBoard/Daq PC-Card User’s Manual
10-12-00
i
Manual Layout
Note that the electronic version of this document is contained on more than one Adobe
®
Acrobat pdf
file, as indicated on the facing page. The files may be read and printed using Adobe
®
Acrobat
Reader. The reader is included on your installation CD.
This manual provides detailed instruction for the proper setup and operation of Daq devices, with exception
of the DaqBoard/2000 Series PCI boards [discussed in a separate manual included on your install CD].
API Command information, essential to those wishing to create their own program applications, is
contained in a separate companion manual, part number 1008-0901. If you prefer to use out-of the-box
software, such as DaqView, you will not need to consult the Programmer’s Manual.
This user’s manual is arranged as follows:
Chapter 1 – The manual begins with
for the DaqBooks, ISA-type DaqBoards, and
Daq PC-Cards hardware and software.
Chapter 2 - This is an
of data acquisition systems and the Daq* family.
Chapter 3 –
describes the appearance and functionality of the DaqBook, ISA-type
DaqBoards, and Dac PC-Cards. Discussion of switches, jumpers, and connections is included.
Chapter 4 - explains the use and features of
DaqView
data acquisition software.
Chapter 5 –
DaqViewXL
describes the Microsoft Excel add-on for data acquisition and spreadsheet
display.
Chapter 6 –
DIAdem
® - the PC Workshop Quick Start and User’s Guide is an abbreviated manual.
It provides for rapid familiarization with the DIAdem-View device. Note that more detailed
information is available in the DIAdem User’s Manual that is distributed with Licensed-Versions of
DIAdem.
Chapter 7 -
DBK Option Cards and Modules
begins with an overview of DBK features and expansion
options. A section on power management describes system power requirements and power
availability from the various DBKs. Then, each DBK is described in a similar format that includes an
overview (usually with a block diagram), hardware and software setup, and additional information as
needed.
Chapter 8 -
Signal Management and Troubleshooting Tips
explains the basics of data acquisition
including terminology, signal management techniques, channel identification, signal modes, etc. A
troubleshooting section explains solutions to common noise, wiring, and configuration problems.
Chapter 9 -
Accelerometer Tutorial
describes how to use accelerometers. Text includes accelerometer
information of systems making use of DBK4 Dynamic Signal Input Cards.
Chapter 10 -
Specifications
lists the physical and performance specifications for all the Daq devices,
including the DBK option cards and modules.
Chapter 11 -
CE Compliance
pertains to CE standards and conditions that are relevant to the Daq
devices.
Chapter 12 -
Calibration
lists the order in which to perform calibration-related adjustments and briefly
discusses
DaqCal.exe
, a program that provides on-screen instruction, graphics, and prompts.
Glossary
Reference Note:
For programming-related information refer to the separate Programmer’s Manual,
p/n 1008-0901. The document is included on your installation CD and is also available in
hardcopy.