Measurement Computing Daq PC-Card User Manual
Page 4
&$87,21
Using this equipment in ways other than described in this manual can cause
personal injury or equipment damage. Before setting up and using your
equipment, you should read all documentation that covers your system. Pay
special attention to Warnings and Cautions.
Reference Note: Your installation CD contains electronic versions of the user
documentation. These versions are in the Adobe Acrobat
®
pdf format and can be
read and printed with use of the Adobe Acrobat Reader
®
. A copy of the reader is
included on your CD.
The following Adobe Acrobat
®
pdf files (located on your install CD)
apply to DaqBooks, DaqBoards [ISA-type] and Daq PC-Cards.
•
DaqBook / DaqBoard [ISA] / Daq PC-Card Users Manual.pdf
Contains DaqBook, DaqBoard [ISA], and Daq PC-Card “hardware-related”
chapters, as well as links to the .pdf files listed below. This .pdf file, plus the
following three make up the complete user’s manual (457-0901). Note that the
Programmer’s Manual (1008-0901) is a completely separate document.
•
DaqView_DaqViewXL
These chapters, regarding out-of-the-box software, are shared by multiple
documents. They make up chapters 4 and 5 of this user’s manual.
•
DIAdem User’s Manual.
The DIAdem file is shared by multiple documents. It constitutes chapter 6 of
this user’s manual.
•
DBK Options
Discusses each of the DBK products currently available. The file is shared by
other documents and constitutes chapters 7 through 12 of this user’s manual.
•
Programmer’s Manual
The programmer’s manual (1008-0901) pertains to developing custom
programs using Applications Program Interface (API) commands.
Reference Note: Programmers should check the readme.file on the install
CD-ROM for the location of program examples included on the CD.
Your order was carefully inspected prior to shipment. When you receive your system, carefully
unpack all items from the shipping carton and check for physical signs of damage that may have
occurred during shipment. Promptly report any damage to the shipping agent and your sales
representative. Retain all shipping materials in case the unit needs returned to the factory.