Measurement Computing DaqBook 2000 Series Installation User Manual

Page 38

E-6 System Expansion

968596

Appendix E

Example 3: DaqBook/2000E with two DBK60 Modules and a DBK203

Channel Input Side Device Interface Side

DaqBook/2000E System

with two DBK60 units and a DBK203

Lines and Cables Used in Example 2 [Device Interface Side Only]:

1. Power Supply - To the DaqBook/2000E POWER IN DIN 5 connector, +10 VDC to +30 VDC,

typically from a TR40U power adapter.

2. From the DaqBook/2000E ETHERNET jack to a 10/100BaseT Ethernet Network or to the

ETHERNET jack on a PC. Applicable Ethernet patch cables (1.5-foot or 7-foot) are CA-242
and CA-242-7, respectively.

3. From DaqBook/2000E’s P4 connector to the DBK203’s P4 connector, via a CA-195-1 cable.

4. From DBK203’s P1 connector to two DBK60 P1 connectors, via two CA-37-3T cables.

Note: Information regarding the use of CA-37-T cables is provided on page E-9.

Reference Notes:

➣

For detailed information regarding the DBK60 3-Slot Expansion Module and its related
Termination Panels, or the DBK203 Screw-Terminal Adapter Module, refer to the DBK Option
Cards and Modules User’s Manual (p/n 457-0905). A PDF version of the document is included
on the data acquisition CD.

➣

Both the DBK Option Cards and Modules User’s Manual (p/n 457-0905) and the DBK Basics
document module include power management information. You should use the Available Power
Chart and DBK Power Requirement Worktable to calculate your system’s power needs. Doing so
will enable you to ensure that adequate power will be supplied to all system components. PDF
versions of both documents are included on your data acquisition CD.

➣

This installation guide exists as an independent document (p/n 1103-0940). It is also included in
the DaqBook/2000 Series User’s Manual, p/n 1103-0901. The manual contains additional
information regarding DaqBook/2000 Series devices.

User’s of the independent installation guide should note that a PDF version of the DaqBook/2000
Series User’s Manual is automatically installed onto your hard drive as a part of product support.
The default location is the Programs group, which can be accessed from the Windows Desktop.
The document can also be read directly from the installation CD by using the <View PDFs>
button, accessible from the CD’s introduction screen. Refer to the PDF documentation for details
regarding both hardware and software.

DBK60 (1 of 2)

DBK60 (2 of 2)

DBK203

DaqBook/2000E

To ETHERNET To POWER