Measurement Computing DaqBook 2000 Series - Manual (Page 74)

10-2 Troubleshooting & Customer Support 897995 DaqBook/2000 and DaqOEM/2000 - IO version
ReadMe Files and the Install CD-ROM
The Install CD-ROM includes ReadMe Files. These files often contain late-breaking information that may
not appear in the user documentation. During installation you should review the ReadMe files when
prompted to by the program.
The Install CD-ROM includes:
• DaqBook/2000 Series Windows NT/2000/XP driver
•
DaqX.DLL
(32-bit API) for DaqBook/2000 Series
• Microsoft C/C++ API support
• Microsoft VB API support
• Borland Delphi API support
• Daq* Configuration Control Panel Applet
• User documentation in Adobe® PDF format
• DaqView
Upon installation, the user needs to run the Daq* Configuration Control Panel applet. The applet is used
to configure the DaqBook device for an appropriate Ethernet Port. This must be performed in order for the
application to access the device through the Windows NT/2000/XP driver.
Driver Support
The daqX API can be used with WaveBook, DaqBook, DaqBoard, Daq PC Card and TempBook product
lines. All daqX functions share the
daq
prefix.
The API support examples can be found in the installed directory:
ProgrammingLanguageSupport\DAQ
Refer to the Programmer’s Manual, p/n 1008-0901.
DaqCOM Issues
DaqCOM support is contained within the Help file support, which is installed with DaqCOM. It is located
within the DaqCOM program group.
DaqCOM support will not be available unless it has been specifically installed with the product. If the
DaqCOM program group is not listed under programs (which can be accessed via the Windows desktop),
then you will need to install it from the data acquisition CD, or download it from our website.