Measurement Computing CB-7011 - Manual (Page 49)

49
CB-7011/CB-7011D, CB-7018 User’s Manual
2.27 @AACA
Description: Clear Latch Alarm
Note: The command is for CB-7011/11D/11P/11PD only.
Syntax: @AACA[CHK](cr)
@ delimiter character
AA address of setting module (00 to FF)
CA command for clear latch alarm
Response: Valid Command: !AA[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
Example:
Command: @01DI Receive: !0120101
Read address 01 digital input, return latch alarm mode, low
alarm is set.
Command: @01CA Receive: !01
Clear address 01 latch alarm, return success.
Command: @01DI Receive: !0120001
Read address 01 digital input, return latch alarm mode, both
alarms are clear.
Related Command:
Sec. 2.21 @AADI, Sec. 2.23 @AAEAT, Sec. 2.26 @AADA
Related Topic:
Sec. 3.6 High/Low Alarm