Measurement Computing CB-7011 - Manual (Page 34)

34
CB-7011/CB-7011D, CD-7018 User’s Manual
2.13 $AA8V
Description: Set LED Configuration
Note: The command is for CB-7011D/11PD only.
Syntax: $AA8V[CHK](cr)
$ delimiter character
AA address of setting module (00 to FF)
8 command for setting LED configuration
V 1=Set LED to module, 2=Set LED to host
Response: Valid Command: !AA[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax error or communication error may get no
response.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
Example:
Command: $0182 Receive: !01
Set address 01 LED to host control, return success.
Command: $0281 Receive: !02
Set address 02 LED to module control, return success.
Related Command:
$AA8 (Sec. 2.12), $AAZ(Data) (Sec. 2.18)