Measurement Computing CB-7011 - Manual (Page 31)

31
CB-7011/CB-7011D, CB-7018 User’s Manual
2.10 $AA5VV
Description: Set Channel Enable
Note: The command is for CB-7018/18P only.
Syntax: $AA5VV[CHK](cr)
$ delimiter character
AA address of setting module (00 to FF)
5 command for settting channel enable
VV channel enable/disable, 00 is all disabled, and FF is all
enabled.
Response: Valid Command: !AA[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax error or communication error may get no
response.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
Example:
Command: $0155A Receive: !01
Set address 01 enable channel 1,3,4,6 and disable channel
0,2,5,7, return success.
Command: $016 Receive: !015A
Read address 01 channel status, return channel 1,3,4,6 en-
able and channel 0,2,5,7 disable.
Related Command:
$AA6 (Sec. 2.11)