Legrand 68REC - Manual (Page 5)

5
Step 3 Remove (2) 8-32 screws and pull off Feed
Plate or housing. Step 4 Use (2) 8-32 screws to install new Feed Plate
or housing
CAUTION: To maintain fire classification, Feed Plates must
be installed.
CAUTION: To maintain fire classification, Feed Plates must
be installed.
Step 3 Slide wire tunnel out of remaining Feed
Housing. Step 4 Rotate center housing and reattach with
(2) 8-32 screws.
180º
WIRE TUNNEL REMOVAL
Step 1 Remove Feed Housing from center and side
without J-box. Step 2 Pull wires out of wire tunnel.
Step 5 Reattach side Feed Housing and feed plate with (4) 8-32 screws.
CAUTION: To maintain fire classification, Feed Plates must be installed.