Legrand 68REC - Manual (Page 3)

3
Step 4 Push Poke-Thru into floor. Step 5 Installation complete.
For Flush Tile Installation (Start with Steps 1 & 2 on previous page.)
Step 3 Place shims around bottom of flange to
match thickness of tile. Flange is 1/8"
thick. (2) 1/8" shims and (2) 1/16" shims
are provided. Push Poke-Thru into floor. Step 4 Use grout and/or silicone caulk
between edges of flange and tile.
NOTE: If more shims are required, use Cat. No 6TS.
Step 1 Insert Stem Assembly into core hole.
INSTALLING STEM ASSEMBLY AND SEPARATE COVER
Step 2 Remove disposable plate and (2) plate clips by
removing the 8-32 screws. Install Flange using
the (2) 8-32 x 1/2" Cap Head screws provided
with the cover assembly.