beautypg.com

10 . sy ste m but ton – Kawai MP6 User Manual

Page 65

background image

65

1

0

. SY

STE

M But

ton

10.2.22 LED Brightness

This adjusts the brightness of the LEDs. You can choose from High or Low.
The Low setting is designed for dark stages, while the High setting is good for
bright ambience.

10.2.23 Out Mode

Sometimes it is convenient to have two mono outputs instead of a stereo
output.
In this case one mono output can be used for your own monitor system and the
other goes to the mixing console.

Stereo

The signal on the Line-Outs is normal stereo.

2xMono

The signal on the Line-Outs is mono on both jacks

Note:

* To avoid unexpected sound issues some stereo effects like AutoPan will be turned off

when 2xMono is selected.

10.2.24 Foot Switch Mode

This parameter sets the mode of FootSW's function.

Normal:

The type of controller assigned to the footswitch is a common SETUP

parameter "FootSW CC#". (see page 46)

Setup+:

The footswitch increments the selected SETUP by 1.

Plybck:

The footwitch starts/stop selected song (audio file etc.) playback.

Metro.:

The footswitch starts/stop selected metronome/rhythm pattern.

Note:

* When the value is ‘Setup+’, the FootSW CC# page will not be displayed.

SYSTEM

LED Bright.=High

SYSTEM

Out Mode =Stereo

SYSTEM

FootSW

=Normal