M e nu but tons – Kawai MP6 User Manual
Page 41
41
6. M
E
NU But
tons
6.2.27 Solo Mode
This parameter determines which note will be played when Solo is ON and more
than one note is being played simultaneously. There are three choices for Solo
note priority.
Last
The most recently played note within a group of notes will be heard when
Solo is ON
Hi
The highest note played within a group of notes will be heard when Solo
is ON.
Low
The lowest note played within a group of notes will be heard when Solo is
ON.
* When the Solo Mode parameter is “Off”, this page will not be displayed.
6.2.28 Damper
This parameter determines if the damper pedal is active (Norm [Int] / On [Ext],
with natural decay), deactivated (Off) or set to HOLD (On, with steady sustain
level) for the selected zone.
Use the HOLD value, if you don’t want a sound to disappear. HOLD is only
available for internal Sounds.
6.2.29 Foot Switch
This parameter determines if a Foot Switch connected to the FOOT SWITCH jack
is active (On) or not (Off) for the selected zone. The type of controller assigned
to the footswitch is a common Setup parameter and is used for all zones of a
Setup as a global parameter.
6.2.30 Expression Pedal
This parameter determines if an Expression Pedal connected to the EXP jack is
active (On) or not (Off) for the selected zone. The type of controller assigned to
Expression pedal is a common Setup parameter and is used for all zones of a
Setup as a global parameter.
6.2.31 Modulation
This parameter determines if the Modulation Wheel is active (On) or not (Off) for
the selected zone.
* When the Tone Wheel sound is selected, this page will not be displayed.
1
Concert Grand
Solo Mode
=Last
1
Concert Grand
Solo Mode
=Last
1
Concert Grand
Damper
= On
1
Concert Grand
Damper
= On
1
Concert Grand
Foot SW
= On
1
Concert Grand
Foot SW
= On
1
Concert Grand
Exp Pedal
= On
1
Concert Grand
Exp Pedal
= On
1
Concert Grand
Modulation = On
1
Concert Grand
Modulation = On