Kawai MP6 - Manual (Page 31)

31
5
. C
o
n
trol Knobs
5.3 TONE MODIFY
The MP6 allows certain characteristics of the sounds to be custom tailored
to suit a particular musical or playing style, or to create many variations and
different types of sounds. TONE MODIFY settings can be done for each zone
individually.
The following parameters are provided:
CUTOFF, ATTACK, DECAY and RELEASE.
Make sure that the TONE MODIFY button in the CONTROL KNOBS section is lit.
If the TONE MODIFY button is turned off, press it to turn it ON.
The CONTROL KNOBS are now active and assigned to the Tone Modify
parameters for the current sound.
Use the CONTROL KNOBS to change the current settings for the selected zone.
Each parameter of the TONE MODIFY function has an adjustable range from -50
to +50.
1 CUT ATK DCY RLS
+5
-
0 -50 +40 -20
CUTOFF: Raising the CUTOFF level makes the sound brighter, lowering
the level makes the sound duller.
ATTACK: As the value increases, the attack time becomes longer, which
means a slower attack is produced.
DECAY: This parameter controls the amount of time from the peak
level to the sustain level of the sound.
RELEASE: This parameter controls the amount of time needed for the
sound to fade out after the key is released.
Volume level
Attack
Decay
Sustain
Level
Release
Time
KeyOff KeyOn
Note:
If the selected zone is set to BOTH, changing the TONE MODIFY parameters affects
both internal and external sections. If you want different settings for internal and
external sections, enter the edit mode by pressing the MENU button and select
internal or external section with the ZONE SELECT button. (See page 35 for details.)