Kawai MP6 - Manual (Page 28)

28
5
. C
o
n
trol Knobs
5. Control Knobs
Select the function with the buttons on the left and use the knobs to change
the values. You can also move the cursor with the MENU buttons and change
the value with the VALUE buttons while the display is showing Control Knobs
function.
5.1 EFFECT
Make sure that the EFFECT button in the CONTROL KNOBS section is lit. If the
EFFECT button is turned off, press it to turn it ON.
The CONTROL KNOBS are now active and assigned to the EFX/REVERB parameters
for the selected zone. Use the CONTROL KNOBS to change the current settings.
1 EfR EfD RvT RvD
4
-
1 64 96 127
EfR (EFX Rate) adjusts the value of the preset parameter for each EFX. (internal
only)
EfD (EFX Depth) adjusts the depth of the EFX added to the sound.
RvT (REVERB Time) adjusts the reverb time. (internal only)
RvD (REVERB Depth) adjusts the depth of the reverb added to the sound.
EFX parameter list
EFX Rate EFX Depth
1. CHORUS rate 0 -12.7Hz dry/wet
2. FLANGER rate 0 -12.7Hz dry/wet
3. CELESTE rate 0 -12.7Hz dry/wet
4. ENSEMBLE rate 0 -12.7Hz dry/wet
5. DELAY 1 delay time 0.650ms wet level
6. DELAY 2 delay time 0.650ms wet level
7. DELAY 3 delay time 0.325ms wet level
8. DELAY 4 delay time 0.650ms wet level
9. AUTO PAN 1 rate 0 -12.7Hz depth
10. AUTO PAN 2 rate 0 -12.7Hz depth
11. AUTO PAN 3 rate 0 -12.7Hz depth
12. TREMOLO 1 rate 0 -12.7Hz depth
13. TREMOLO 2 rate 0 -12.7Hz depth
14. TREMOLO 3 rate 0 -12.7Hz depth
15. TREMOLO 4 rate 0 -12.7Hz depth
16. PHASER 1 rate 0 -12.7Hz dry/wet
17. PHASER 2 rate 0 -12.7Hz dry/wet
18. ROTARY 1 slow/fast - dry/wet