Kawai MP6 - Manual (Page 21)

21
2
. Basic Oper
a
tions
The transmitted program number is shown in the display.
3
001:000-000 01
You can also send program change numbers by using VALUE buttons.
Note:
Full program change numbers including bank numbers can be transmitted by
setting them in MENU and saving it as a SETUP. See page 39/40 for details.
2.9 Selecting a SETUP
The MP6 offers 256 preset combinations of the panel settings called SETUPs.
To select a SETUP, press the SETUP button. Now the SOUND SELECT buttons are
used to select a SETUP. Use a combination of the numbers in the upper, second
and third rows to select a desired SETUP. The display will show the selected
SETUP name.
GrandPno1+Str1
To check the sound (internal) or program number (external) assigned to each
zone, press the ZONE SELECT button. The display briefly shows the assigned
sound name or program number, and then automatically returns to the SETUP
name in a few seconds.
If you hold a ZONE SELECT button for 2 seconds the display will show you the
key range information for that zone. You can also set the key range using the
same procedure that is used in Sound mode.