Kawai MP6 - Manual (Page 13)

13
1
. P
a
rt
Names and F
u
nc
tions
1.3 REAR PANEL
1. POWER SWITCH
Turns the MP6 ON or OFF.
2. POWER RECEPTACLE
Connect the power cable, which is included in the MP6 package, to this receptacle.
3. MIDI JACKS
These jacks are used to connect the MP6 with external MIDI devices such as a MIDI sound
module or a MIDI sequencer.
4. USB to Host PORT to Host PORT to Host PORT
This jack is used to connect the MP6 with a personal computer. See page 86 for details.
5. FOOT CONTROLLERS
EXP JACK
An expression pedal can be connected to this jack.
The expression pedal can be assigned to different MIDI control numbers or functions in
the Menu.
DAMPER JACK
This jack is used to connect the Foot Pedal included with the MP6 (KAWAI F-10H).
6. FOOT SWITCH
A momentary footswitch can be connected to this jack (EX: KAWAI F-1 or F-20). The
FootSwitch can be assigned to different MIDI control numbers or functions in the Menu.
When using the KAWAI F-20. The right pedal works as a Foot Switch, and the left pedal
works as a Soft pedal. When the Rotary EFX is in use, the Soft pedal changes between
Fast & Slow Rotor speeds.
7. OUTPUTS
R, L/MONO OUTPUTS
The R, L/MONO outputs are used to connect the MP6 to a musical instrument amplifier
using standard 1/4 inch phone jacks. The R, L/MONO outputs can also be used to connect
the MP6 to a PA system or recording console.
8. USB TO DEVICE PORT
This port allows a USB memory device to be connected to the MP6.