Ivoclar Vivadent SpeedCEM - Manual

SpeedCEM ®
Description
SpeedCEM is a self-adhesive, self-curing dental resin cement with light-
curing option for the cementation of indirect restorations made of high-
strength all-ceramic, composite, metal-ceramic and metal. When SpeedCEM
is used, additional dentin bonding agents are not required. The automix
syringe enables a time-saving direct application of the luting material into
the restoration.
Shades
SpeedCEM is available in three shades with various degrees of translucency:
– transparent
– yellow
– white opaque
Working and setting times
The following times apply as soon as SpeedCEM has been dispensed from
the automix syringe. (The working and setting times depend on the ambient
temperature):
Attention
After SpeedCEM has been dispensed from the automix syringe, the setting
process can be accelerated by intensive illumination (operating light,
ambient light).
Composition
The monomer matrix is composed of dimethacrylates and acidic monomers.
The inorganic fillers are barium glass, ytterbium trifluoride, co-polymer and
highly dispersed silicon dioxide. Additional contents are initiators, stabilizers
and colour pigments (< 1 %). The primary particle size of the inorganic
fillers is between 0.1 µm and 7 µm. The mean particle size is 5 µm. The
total content of inorganic fillers is approx. 40 vol%.
Indication
1) Permanent cementation on natural teeth in conjunction with
restorations made of:
– metal and metal-ceramic (inlays, onlays, crowns, bridges, endodontic
posts)
– high-strength all-ceramic: zirconium oxide, lithium disilicate and
aluminium oxide ceramics (crowns, bridges, endodontic posts)
– fibre-reinforced composite (endodontic posts)
2) Permanent cementation of crowns and bridges made of:
– metal and metal-ceramic
Working time
Setting time (without
working time)
At room temperature
23 °C ± 1 °C
150 ± 30 sec
240 ± 60 sec
Intra-orally
approx. 37 °C ± 1 °C
110 ± 30 sec
160 ± 40 sec
– Itsekiinnittyvä, itsekovettuva,
hammashoidossa käytettävä
yhdistelmämuovisementti, jota
valinnaisesti voidaan käyttää
valokovetteisena
– Kjemisk adhesiv, kjemisk herdende
dental komposittsement med mulighet
for lysherding
– Zelfadhesief, zelfuithardend tand-
heelkundig composietcement met de
optie van lichtuitharding
– Αυτoσυγκoλλητική,
αυτoπoλυµεριζ µενη, oδoντιατρική
ρητινώδης κoνία µε δυνατ τητα
φωτoπoλυµερισµoύ
– Difl hekimli ¤ inde kullanılan, kendinden
adezif ve kendinden polimerize olan,
ıflıklı polimerizasyon opsiyonlu
kompozit siman
– ë‡ÏÓ‡‰„ÂÁË‚Ì˚È, Ò‡ÏÓÚ‚Â‰Â˛˘ËÈ
ÒÚÓχÚÓÎӄ˘ÂÒÍËÈ ÍÓÏÔÓÁËÚÌ˚È
ˆÂÏÂÌÚ Ò ‰ÓÔÓÎÌËÚÂθÌÓÈ
‚ÓÁÏÓÊÌÓÒÚ¸˛ ÙÓÚÓÔÓÎËÏÂËÁ‡ˆËË
– Samoadhezyjny cement kompozytowy,
o podwójnym mechanizmie polimeryzacji
– Self-adhesive self-curing dental resin
cement with light-curing option
– Selbstadhäsiver, selbsthärtender, zahn-
ärztlicher Compositezement mit
optionaler Lichthärtung
– Composite de collage,
autopolymérisant avec option
photopolymérisation
– Cemento composito dentale auto-
adesivo, autoindurente con opzione di
fotoindurimento
– Cemento dental composite auto-
adhesivo, autopolimerizable con
opción de fotopolimerización
– Compósito de cimentação auto-
adesivo, autopolimerizável, com opção
fotopolimerizável
– Självbondande, självhärdande, dentalt
resincement med ljushärdnings-
möjlighet
– Selvadhæsiv, selvhærdende, dental
kompositcement med mulighed for
lyspolymerisering
English
Käyttöohjeet
Bruksanvisning
Productinformatie
Oδηγίες Xρήσεως
Kullanım Kılavuzu
àÌÒÚÛ͈Ëfl
Instrukcja stosowania
Instructions for Use
Gebrauchsinformation
Mode d’emploi
Istruzioni d’uso
Instrucciones de Uso
Instruções de Uso
Bruksanvisning
Brugsanvisning
62
78
02
/0
21
2/
W
E3
/G
For dental use only.
Caution: U.S. Federal law restricts this
device to sale by or on the order of a
licensed dentist.
Made in Liechtenstein
Ivoclar Vivadent AG,
FL-9494 Schaan/Liechtenstein