Hypertherm HT2000-200 Volt - Manual (Page 77)

Part No. Length Part No. Length
INSTALLATION
4-24 HySpeed HT2000
Instruction Manual
19
Nitrogen Plasma Supply Hose – Nitrogen Supply to Gas Console
Gas Console Connections
See page 4-10 for gas console connection to power supply.
Plasma Gas Supplies
Oxygen Plasma Supply Hose – Oxygen Supply to Gas Console
Note: If cutting with oxygen as the plasma gas, nitrogen must also be connected to the gas
console to achieve the proper oxygen/nitrogen mixtures in the preflow and cut flow
conditions.
Air Plasma Supply Hose
(Customer Supplied)
– Air Supply to Gas Console
Shield Gas Supplies
Any supply gases that will be used for the shield gas, attach to the same point on the gas console – see Fig.
4-14.
Shield Gas Supply Hose – Shield Supply to Gas Console
17
18
18
19
Part No. Length Part No. Length
024204 15 ft (4.6 m)
024205 25 ft (7.6 m)
024155 50 ft (15 m)
024206 100 ft (30 m)
024159 150 ft (46 m)
Part No. Length Part No. Length
024210 10 ft (3 m)
024203 15 ft (4.6 m)
024232 20 ft (6 m)
024134 25 ft (7.6 m)
024211 35 ft (10.6 m)
024112 50 ft (15 m)
024148 75 ft (23 m)
024116 100 ft (30 m)
024120 150 ft (46 m)
024185 180 ft (55 m)
024124 200 ft (61 m)
024043 4 ft (1.2 m)
024341 10 ft (3 m)
024342 20 ft (6 m)
024133 25 ft (7.6 m)
024012 50 ft (15 m)
024147 75 ft (23 m)
024115 100 ft (30 m)
024119 150 ft (46 m)
024184 180 ft (55 m)
024123 200 ft (61 m)