Hypertherm HT2000-200 Volt - Manual (Page 35)

SPECIFICATIONS
2-4 HySpeed HT2000
Instruction Manual
19
Initial Height Sensing (IHS) – Optional
This unit, used with two inductive probes, is designed to automatically detect the workpiece surface and index
the torch to the pierce position. This system can be used for underwater, at the water line, or above-water
applications. This unit interconnects with the power supply and the inductive probes, and requires an air
supply to operate.
Timer/Counter – Optional
This unit allows the operator to monitor the number of arc starts and the cumulative time that the arc is on in
hours. The arc starts can be reset. This unit connects with the power supply.
Water Muffler – Optional
The water muffler for the HT2000 system is an option which greatly improves cutting safety and pollution
control capabilities. The water muffler can be used to cut both above and below water.
The water muffler
can not be used with the stainless steel machine torch
. Refer to the Water Muffler Instruction Manual
(#802050) for more detailed information.