Harken 3813 System AA Battcar - Manual (Page 12)

12 System AA (CB)
2. Drill track hole, holding drill perpendicular to mast face. Tap threads and install
screws using blue Loctite ® .
3. Align track at joints. Use 2711 splice links and round rods or dowels on
outside of track to align during installation. Hold in place with spring or “C”
clamps until track is secured.
Load all cars before installing bottom track and endstop.
Installation – CB System (Drill & Tap) Install Track
Loctite is a trademark of Henkel