Harken 3813 System AA Battcar - Manual

Please read these instructions carefully before installing, servicing, or operating the equipment.
This manual may be modified without notice. See: www.harken.com/manuals for updated versions.
PLEASE SAVE THESE INSTRUCTIONS
BATTCAR INSTALLATION MANUAL
System AA
Installation manual – Intended for specialized personnel or expert users
4247 10/14
Introduction
Safety precautions 2
Preassembly (slug mount/drill & tap)
Parts 3
Tools 4
Sizing 4
Sail modifications
4
Track length (slug mount only) 4 - 5
Cutting top track to length (slug mount only) 6
Check fit of mounting slugs/cars (sug mount only) 7
Installation (slug mount)
Install track 8 - 10
Install screwpin endstop kit 10
Preassembly (drill & tap)
Parts 4, 11
Track length 11
Remove old track 11
Installation (drill & tap)
Drill, tap, and fasten 11 - 12
Operation (slug mount/drill & tap)
Load cars on track without sail 13
Load cars on track with sail 14
Lost balls 14
Load sail on cars 15
Maintenance (slug mount/drill & tap)
Car maintenance/cleaning 16
Removing sail 16
Lazy jacks 16
Operating precautions 16
Sailmaker's instructions (slug mount/drill & tap)
Dimensions 17
Installing 3813 headboard coupler assembly
17
Headboard pates 17
Distance between atachment points/reef points 18
Attaching sail to intermediate cars 18
Troubleshooting – installation/operation