Guralp Systems CMG-6TD - Manual (Page 78)

CMG-6TD Calibrating the 6TD
sample rate; although the same information is present in higher-rate
streams, they also include a large amount of high-frequency data which
is not relevant in this context.
The calibration script automatically performs appropriate averaging to
reduce the effects of aliasing and cultural noise.
6.5.2 Sensor response codes
The correct response code for use with your instrument is shown in the table
below. If the response of your instrument is not listed, please contact
[email protected] for advice.
Sensor Sensor type code Units (V/A)
CMG-40T-1 or 6T-1,
1 second – 50 Hertz response
CMG­40_1HZ_50HZ V
CMG-40T-1 or 6T-1,
1 second – 100 Hertz response
CMG­40_1S_100HZ V
CMG-40T or 6T,
2 second – 100 Hertz response
CMG­40_2S_100HZ V
CMG-40T or 6T,
10 second – 100 Hertz response
CMG­40_10S_100HZ V
CMG-40T or 6T,
20 second – 50 Hertz response
CMG­40_20S_50HZ V
CMG-40T or 6T,
30 second – 50 Hertz response
CMG­40_30S_50HZ V
CMG-40T or 6T,
60 second – 50 Hertz response
CMG­40_60S_50HZ V
MAN-T60-0002 78 Issue F - February 2014