Guralp Systems CMG-6TD User Manual

Page 48

Installing the 6TD

3. Type the IP address of the 6TD, a colon (“:”) and the output port that

you chose when configuring the network interface. If you accepted the

defaults, this will be port 10,002. The entry should look like

92.168.33.2:10002

Click

4. After a short wait, an entry for the instrument should appear in the

pane. Right-click on the entry and select Connect.

5. If the connection is successful, you should see blocks appearing in the

Block Rx pane, and streams will appear in Scream!'s main window.
Close the Network Control window.