Guralp Systems CMG-6TD User Manual

Page 40

Installing the 6TD

To navigate around the Web site, click on the entries in the left-hand
menu. When you have made changes to the settings on any page, save

them by clicking OK before you leave the page.

2. Click on WLAN (Wireless Local Area Network) to open the WLAN

Settings page.

3. Change the Network Name (i.e. SSID) from LTRX_IBSS to a suitable

name for your installation. This name will be announced to any
nearby wireless devices when they search for networks.

Make a note of the SSID that you have used.

4. Under Wireless Network Security, set Security to WEP and configure

the security parameters. If you do not do this, anyone will be able to
access the 6TD and change its configuration.

Make a note of the security parameters you have used.

5. Click OK, followed by Apply Settings in the main menu. The Wi-Port

will restart.

If the Wi-Port is still using an automatically chosen random IP

(beginning with 169.254), the IP address will change when you do this.