Gasboy CFN Series Tokheim Pump PC Interface - Manual (Page 5)

MDE-4624C CFN Series Tokheim® Pump PC Interface for CFN III with Windows NT® or XPE · January 2011 Page 1
Purpose Introduction
1 – Introduction
Purpose
This manual is intended for technicians and field engineers who set up Tokheim ® pumps using
Gasboy ® ’s Tokheim Pump PC Interface with CFN III version 3.4 or later. The interface can be
connected using a Tokheim 67 or Tokheim 98 Box. A 67 Box supports 16 pumps/dispensers; a
98 Box supports 8 pumps/dispensers. A CFN III supports a maximum of 32 dispensers.
Notes: 1) The Tokheim Pump PC Interface can only be used with a CFN III system.
2) The site must be running Windows NT ® or Windows ® XPE and CFN III version 3.4
or later software.
The COMM port availability must be determined before you install the interface. For more
information on CFN III communication ports, refer to MDE-4298 CFN Series SC III
Installation Manual.
Related Documents
CFN III - Version 3.4
Document Number Title GOLD Library
MDE-4298 CFN Series SC III Installation Manual Gasboy CFN Series Controllers and POS
MDE-4315 CFN III Manager’s Manual for Windows NT Gasboy CFN Series Controllers and POS
MDE-4316 CFN III Configuration Manual for Windows NT Gasboy CFN Series Controllers and POS
CFN III - Version 3.5
Document Number Title GOLD Library
MDE-4762 CFN III Manager’s Manual for Windows XP
Embedded Gasboy CFN Series Controllers and POS
MDE-4773 CFN III Configuration Manual for Windows XP
Embedded Gasboy CFN Series Controllers and POS