Gasboy 03908X - Manual (Page 25)

MDE-4351A Gasboy ATC Kits 039086 and 039087 Installation Manual • February 2006 Page 25
Appendix: Totalizer Display Information
Appendix: Totalizer Display Information
By activating the magnet located at the opposite side of the totalizer, various information will
appear on the display as follows:
Information Type Definition Example of Display
Volume Displays uncompensated volume
Probe Temperature Displays probe temperature (in Celsius only)
Flow Rate Displays flow rate (in LPM only)
Software Version Displays software version number
ATC Status Displays ATC status
Leftmost digits (842) are error indicators which are blank when
the corresponding error condition is not active.
8 = temperature probe fault detected
4 = pulser error occured
2 = exceptional reset detected
Rightmost digit (2) indicates whether temperature compensation
is enabled, and if so, what product is being dispensed.
0 = temperature compensation disabled
1 = product is gasoline and compensation enabled
2 = product is diesel and compensation enabled
0023.43
0 23.2
189.2
1.30
842 .2